Mixer Description; Introduction - Tatoma MT-7 User Manual

MT HORIZONTAL MIXER WAGON.

1. MIXER DESCRIPTION

1.1.

INTRODUCTION

To assure that the mixer is operated correctly, it is recommended to designate a person in charge, who
has previous experience driving tractors or other farm machinery. This will also facilitate the instruction
period.
Warning! Technical data and characteristics of the trademark or model, of the different marketing materials
or other components of the mixers cited in this manual are indicative. TATOMA reserves the right to modify
the design or specifications without prior notice.
1.2. USE OF THE MIXER
The mixer wagon has been designed to perform the following operations only:
- Cut of silage ingredients (only models with silo cutter)
Load loose silage, bulk products, or other ingredients.
-
▪ Self-loading system (only models with silo cutter)
▪ Using loaders
▪ Using augers, conveyors, or from silos.
- Shredding and mixing of the previous products.
- Ration dosification and distribution in feeders.
It is strictly forbidden to carry out operations other than those specified here. There is a risk of
endangering the physical integrity of the driver and people close to the mixer. Likewise,
serious breakdowns can occur in the mixer.
Carrying out operations different from those specified will result in the immediate loss of the
warranty.
The previous operations should be carried out by a single person. When other machines
are used with the mixer (loading the mixer), the operation of these shall be coordinated by the
mixer's operator.
During the performance of the above operations, the presence of unauthorized persons in the
vicinity of the working area of the mixer shall be avoided at all times..
USER'S MANUAL
3