Related Manuals for OPTO-EDU A13.2603
Summary of Contents for OPTO-EDU A13.2603
- Page 1 A13.2603 Metallurgical Microscope Instruction Manual To ensure the safety and obtain satisfactory performance, please study this instruction manual thoroughly bef ore start to use the instrument.
- Page 2 CONTENTS 1. Specifications ....................2 2. Installation & Operation ................3 3. Maintenance ...................... 4 4. Trouble Shooting ....................6...
- Page 3 Fig.1 MIT 100 binocular metallurgical microscope ○ ○ ○ 1 Seidentopf Binocular head 2 E-pi Unit 3 Screw C ○ ○ ○ 4 Eyepiece 5 Screw B 6 Nosepiece ○ ○ ○ 7 Objectives 8 Stage Plate 9 Stage ○ ○...
-
Page 4: Specifications
Fig.2 MIT 100 trinocular metallurgical microscope Purpose: MIT series upright metallurgical microscope is designed for factories, universities and relative research institutes. The series microscope with original style, steady structure, convenient operation and clear image is suitable for observing various metallurgical specimens and IT material. -
Page 5: Installation & Operation
1.2 Objectives (used with 10X eyepiece) Numerical Objective Working Definition Aperture Field Distance Objective (μm) (N.A.) (ф18) (mm) 0.13 3.6mm 2.58μm 16.07 0.25 1.8mm 1.34μm 18.48 20X (s) 0.40 0.9mm 0.84μm 8.35 50X (s) 0.70 0.48μm 1.95 1.3 Mechanical tube length: 160mm, 1.4 Conjugate distance: Infinity 1.5 Head: Seidentopf Binocular or Trinocualr, Inclined 30°, Rotable 360°, Anti-fungal systems. -
Page 6: Maintenance
Put the sample onto the stage plate, turn the stage knob to put the sample into the light path. 3) Put 10X objective into light path, turn coarse focusing knob, observe from right eyepiece with right eye, then turn slowly fine focusing knob to make the image clear after finding image. 4) Put the other objectives into the light path. - Page 7 3.2 Environment of using and placing 3.2.1 Microscope should be used and placed in a cool, dry, non-dust, non-shake and non-corrosive gases environment. 3.2.2 Microscope should be used in environment of indoor temperature 0°-40°C and maximum relative humidity 85%. 3.2.3 Removing equipment is suggested to be installed when microscope used in heavy humidity area to avoid fungus and mist damage instrument.
-
Page 8: Troubleshooting
4. Troubleshooting In the period of using microscope, if there is any trouble occurs, please referring to the following sheet listed some common troubleshooting resolve them Trouble Causation Remedy Plug is unreliable Plug in again Switch on but bulb Bulb is broken Change bulb dark Fuse is broken... - Page 9 MIT100 Binocular Metallurgical Microscope...