Advertisement
PRINT A TEST REPORT DIRECTLY FROM THE TPMS CONNECT EVO TPM2 TOOL
When a Bluetooth connection between the TPMS CONNECT EVO and the computer is
established, it is possible to directly print a report. Simply touch the print button on the
TPMS CONNECT EVO tool and a print will be immediately made.
25. Sensor installation/removal procedure
25.1.
Maintenance equipment required for TPMS-equipped tires
TPMS-equipped wheels normally use low-section tires with high speed rating or
run flat tires, either self-supporting or auxiliary-supported (PAX System or SR
Support Ring tires with insert). Tire installation/removal procedures are similar to
those for conventional tires, except for auxiliary-supported run flat tires.
For auxiliary-supported run flat tires (PAX System or Support Ring)
equipped with TPM sensors, you will have to use tire removal/installation equipment
approved by the tire manufacturer. These tires require special accessories and the
installation/removal procedures are different from those used for standard tires.
Follow the installation and removal instructions and procedures provided by the
manufacturers of tire, sensor, vehicle and tire removal/installation equipment.
The information provided herein is general information applicable to most sensors
found in the market. In addition to the appropriate tire changer, when you change
sensors you will also need suitable sensor replacement kits that include one or more
wrenches, O-rings,
valve caps in different colors, valve body and valve insert.
To install and remove TPMS-equipped wheel tires, we recommend
using the latest tire changers which are especially suited to install
low-section tires or large-size tires on alloy wheels. It is essential
that the tire changer be equipped with plastic pressure rollers so as
to ensure correct pressure during installation without damage to
wheel rim, sensor and tire bead.
Advertisement
