Advertisement
....
18
19
The latter case is likely due to an oversight during the test procedure. Two valves with the
same ID installed on the same vehicle are a rare occurrence.
If you have OBD options it's possible continue with EASY CHECK procedure otherwise
you can realize just sensor check.
20
21
Steps 6 through 8 are repeated to test the other
vehicle wheels.
The tester displays a screen page with ID.
Is possible to see also the pressures collected
,selecting
Once the tester is finished, it is possible to save the
collected info into the test database
Connect TPM tool to OBD socket
Sensor ID code check on the vehicle control unit.
During this phase the software ensures that the
control unit has the same ID codes read through
radio frequencies; if this is not the case the
software requests if you want to match the control
selecting
Advertisement
