Advertisement
24. Functions
24.1.
ID Sensor Coding
By selecting this function the instrument will enter the new sensor ID code into the
control unit (OBD) in case of vehicle models B and C described in paragraph 9. It is
possible to carry out this operation in 2 different ways:
a. read the sensor code through Radio Frequencies, thus using the EOBD cable to
send it to the control unit;
b. enter the code manually on the TPMS CONNECT EVO PLUS instrument and use
the EOBD cable to send it to the control unit.
Mode "a" is the fastest and easiest one, and you do not have to manually enter the ID
code in the instrument; furthermore this mode can be carried out with fitted tyre since
the ID code is read by the instrument through radio frequencies.
Mode "b" can be used in unusual and special cases of many vehicles in the workshop
featuring the same sensor that can jam radio frequencies. In these cases it is
recommendable that the operator reads the ID code directly on the sensor.
Nevertheless, this function allows completing the operation even in "extreme" cases.
To start the sensor coding operation select vehicle, make, model, year.
Step
Screen shot
1
2
Description
Choose VEHICLE SELECTION
Choose Make, model, year
Advertisement
