Advertisement
21.1.
Last 30 Cars:
This function lets you view Vehicle Test results saved during past sessions. You may also
use the "Location Test" function to determine whether the sensors installed on the
vehicle are still in the same positions as when the test was saved.
are still in the same positions as when the vehicle was brought in. This way, you can
establish that any TPMS malfunction has nothing to do with tire repair.
21.2.
Last 30 sensors:
This function lets you view Sensor Test results.
21.3.
Last 30 Prog.Sensor:
This function shows you the last 30 programmed universal sensors
21.4.
Upload to PC:
This function lets you upload all data stored in the tester to your PC via the USB port or
Bluetooth using TPMS manager
NOT CORRECT< ITS SHOWS FIRMWARE AND SD CARD UPDATE
21.5.
Test RF Key
The purpose of this function is to check radio frequency data transmission from vehicle
remote control devices and battery charge. To ensure accurate test results, perform this
test well away from any radio frequency signal sources.
Specifically, you may perform the "vehicle test" when the vehicle is
brought in (as outlined in paragraph 12.6) and save the test; upon
vehicle delivery, you may call up the vehicle log and check -
together with the owner - that sensors are operating properly and
Advertisement
