Advertisement
17.2. TPM II– PC Setup Communication
Wireless communication reduces the number of wires/cables in the
workshop. This reduces both obstacles interfering with people's
movement in the shop and mechanical shock from the PC or TPM II tool
due to accidental collision.
The TPM II can communicate with a PC in 2 different ways:
- USB
- Bluetooth wireless communication
On the tool is showed which communication type is enabled
17.3. Bluetooth Setup
Before proceeding with this section, be sure that the Bluetooth driver
for the Bluetooth peripheral on the PC is correctly installed.
To avoid conflict with the driver and the software management, please
check that only 1 Bluetooth peripheral is active on the PC.
The Bluetooth on the TPM II tool is a device classified as Class 1
distance in open space (space without any obstacle). Please use a
Bluetooth peripheral device PC of at least Class 1 to ensure proper
communication in a workshop area ranging between 15-20m from the
There is no USB symbol found in the tool
when the tool is connected to a pc
Bluetooth symbol is present see picture.
Advertisement
