NordicTrack FUSION CST STUDIO User Manual page 8

3. Press the Rear Bottom Cover (67) onto the
Frame (1).
Then, press the Front Bottom Cover (109) onto
the Frame (1), slide it upward, and attach it with
an M4 x 16mm Self-tapping Screw (102).
Note: For future reference, note that the large
serial number decal (A) is attached to the Frame
(1) beneath the Front Bottom Cover (109).
4. Tip: Avoid pinching the Rope (not shown).
With the help of another person, pivot the right
Tower Arm (19) upward and secure it to the
Frame (1) with an M10 x 30mm Screw (100).
Repeat this step for the left Tower Arm (19).
3
1
109
102
4
19
8
67
A
1
19
100