Page 1
USER’S MANUAL Model No. NTL08009.3 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CON- TACT THE STORE; please contact Customer Care.
14. To informed of all warnings and precautions. purchase a surge suppressor, see your local NordicTrack dealer, call the telephone number 3. Use the treadmill only as described. on the front cover of this manual, or see your local electronics store 4.
Page 4
20. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. DANGER: the power cord, and press the power switch into the off position when the treadmill is not Always unplug the power in use.
Thank you for selecting the revolutionary NordicTrack ing this manual, please see the front cover of this man- ® A2550 PRO treadmill. The A2550 PRO treadmill offers ual. To help us assist you, please note the product an impressive selection of features designed to make model number and serial number before contacting us.
ASSEMBLY Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam- aging parts, do not use power tools for assembly.
Page 7
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton.
Page 8
3. Identify the Right Upright (83), which is marked with a “Right” sticker. Have a second person hold the Right Upright near the Base (94). See the inset drawing. Tie the wire tie in the Right Upright (83) securely around the end of the Upright Wire (85).
Page 9
5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (55) so that the treadmill is more stable; do not fully fold the Frame yet. Insert a 3/8" x 5 1/2" Patch Bolt (7), a 3/8" x 3 3/4"...
Page 10
7. Attach the Frame Crossbar (107) to the Frame (55) with two 1/4" x 1 3/4" Patch Bolts (91). With the help of a second person, tip the tread- mill so that the Base (94) is flat on the floor. 8.
Page 11
9. With the help of a second person, hold the con- sole assembly near the Right Upright (83) and Console the Left Upright (not shown). Assembly Connect the Upright Wire (85) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place.
Page 12
11. See steps 4 and 5. Tighten all the Patch Bolts Console used in these steps. Assembly Attach the Left Accessory Tray (101) and the Right Accessory Tray (104) to the console as- sembly with eight #8 x 1/2" Screws (1). 12.
Page 13
13. Raise the Frame (55) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. Attach the upper end of the Storage Latch (51) to the Frame Crossbar (107) with a 3/8"...
OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into the surge suppressor or into an outlet on the same Your treadmill, like other electronic equipment, can be circuit.
Page 15
CONSOLE DIAGRAM Audio Jack FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the console’s stereo sound system. The treadmill console offers an impressive array of To turn on the power, see page 16. To use the man- features designed to make your workouts more effec- ual mode, see page 16.
Page 16
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
Page 17
4. Change the incline of the treadmill as desired. 6. Measure your heart rate if desired. To change the incline of the treadmill, press the Before using Incline increase or decrease button, or one of the 1 the handgrip Step Incline buttons numbered 0 to 10. Each time pulse sensor, you press one of the buttons, the incline will gradu- remove the...
Page 18
HOW TO USE A PRESET WORKOUT is programmed for Current Segment the next segment, 1. Insert the key into the console. the speed and/or incline setting will See HOW TO TURN ON THE POWER on page 16. flash in the dis- plays for a few 2.
Page 19
HOW TO USE THE IFIT TRAINING MODE HOW TO USE THE STEREO SOUND SYSTEM The optional iFit Live module allows your treadmill to To play music or audio books through the console’s communicate with your wireless network and unlocks stereo speakers, you must connect your MP3 player, exciting new features.
Page 20
THE INFORMATION MODE The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While The console features an information mode that keeps the demo mode is turned on, the console will function track of the total distance that the walking belt has normally when you plug in the power cord, press the moved and the total number of hours that the treadmill...
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to the lowest position before you fold the treadmill. left.
TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Page 23
Remove the four #8 x 1" Screws (49) and carefully remove the Motor Hood (61). Locate the Reed Switch (44) and the Magnet (43) on the left side of the Pulley (42). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and 1/8 in.
Page 24
PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn;...
EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
PART LIST —Model No. NTL08009.3 R1112A To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Screw Storage Latch #8 x 1" Tek Screw #8 x 1 1/2"...
Page 27
Key No. Qty. Description Key No. Qty. Description Left Accessory Tray Hood Clip Console Base Latch Warning Decal Module Housing Site Warning Decal Right Accessory Tray Wire Tie Clamp Access Door #8 x 3/4" Tek Screw Pulse Bar Small Platform Cushion Frame Crossbar –...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...