NordicTrack FUSION CST STUDIO User Manual page 16

HOW TO CHANGE CONSOLE SETTINGS
1. Select the settings mode.
To select the settings mode, press and hold the
power button for approximately 5 seconds. The
settings information will appear in the display.
2. Navigate the settings mode.
While the settings mode is selected, the display will
show several optional screens. Press the increase
button repeatedly to select the desired optional
screen.
3. Change settings as desired.
Version—The version number of the console
software will appear in the display.
Display Test—This screen is intended for use by
service technicians.
Key Test—This screen is intended for use by
service technicians.
RPM of Disc—This screen is intended for use by
service technicians.
Pulley Test—This screen is intended for use by
service technicians.
Units—The currently selected unit of measure-
ment will appear in the display. To toggle the unit of
measurement between maximum power output in
watts and resistance in pounds, press the decrease
button repeatedly.
4. Exit the settings mode.
Press the increase button to exit the settings mode.
THE OPTIONAL HEART RATE MONITOR
Whether your
goal is to
burn fat or to
strengthen your
cardiovascular
system, the key
to achieving the
best results is
to maintain the
proper heart
rate during your
workouts. The optional heart rate monitor will enable
you to continuously monitor your heart rate while you
exercise, helping you to reach your personal fitness
goals. To purchase an optional heart rate monitor,
please see the front cover of this manual.
Note: The console is compatible with all Bluetooth
Smart heart rate monitors.
16