Renumbering Marks; Manual Locate Function - Tascam HS-8 Owner's Manual
8 channel audio recorder
Hide thumbs
Also See for HS-8:
- Software manual (13 pages) ,
- Release notes (4 pages) ,
- Release notes (2 pages)
Table of Contents
Advertisement
FRAME EDIT ON
FRAME EDIT OFF
3 Touch a number button to edit a mark. Use the
dial to change the time for the selected
DATA
number.
Press the
button to confirm the setting and
ENTER
return to the
MARK LIST
Touch the
button to reset the input value.
CLEAR
TIP
You can use a PS/2 keyboard to set these values. Press the Enter key
to confirm and press the ESC key to reset the input value.
Renumbering marks
1 Touch the
button on the
RENUMBER
to open the following confirmation message.
2 Press the
button or the
OK
the marks.
7 – Mark and Locate Functions
screen.
screen
MARK LIST
dial to renumber
DATA
Manual locate function
You can directly input a time and locate to it. Touch the
button on the Home Screen to open the
Manual Locate
screen. Touch the
MANUAL LOCATE
set whether or not the frame value can be edited.
FRAME EDIT ON
FRAME EDIT OFF
There are three locate modes.
ABS: Input an actual time and locate to it.
+: Input an amount of time to go forward from the current
time and locate to the new time.
–: Input an amount of time to go back from the current
time and locate to the new time.
Input the time using the number buttons. You can also
select a number field and use the
time.
Press the
button to locate to the new time and
LOCATE
return to the Home Screen.
Touch the
button to clear all input values.
CLEAR
TIP
You can use a PS/2 keyboard to set these values. Press the enter key
on the PS/2 keyboard to confirm or press the ESC key button to clear
all input values.
button to
FRAME EDIT
DATA
dial to adjust the
57
TASCAM HS-8
Advertisement
Table of Contents
