Tascam HS-8 Owner's Manual page 64

12 – Messages
Message
Digital Input Error
DIN1-2 (Unlocked)
DIN3-4 (no signal)
DIN5-6 (not audio)
DIN7-8 (unmatched Cbit)
External Clock Lost,
Switched to Internal
External Clock Regained
Switch to External?
Folder Copy failed
Folder Delete failed.
Folder Load failed.
Input Volume Locked
Input Volume
is locked
Last loaded project has
no folders.
Please make new folder.
Last loaded project
cannot be found.
Please select a project.
Last loaded folder
cannot be found.
Please select a folder.
Load selected project?
""pppppppp""
Load selected Folder?
""ssssssss""
Load selected Take?
""tttttttt""
Loading Project...
Loading Folder...
Loading Take...
Make new folder?
""ssssssss""
Make Folder failed
Making Folder...
Mark Point set
New Folder Name must not
start with ""@""
No Call Point
No Mark Point
No Tracks Armed for Record
Operation failed.
Operation failed.
Internal File / Folder
limit reached.
Operation failed.
Cannot find this ***.
Please Rebuild.
64
TASCAM HS-8
Details and responses
An error occurred with the digital input selected
for the input signal.
Synchronization with an external clock was
disrupted, so the internal clock was activated.
Synchronization with an external clock became
possible again.
Copying failed.
Deletion of the folder failed.
Loading of the folder failed.
The input volume is locked to prevent accidental
operation.
The most recently loaded project does not have
any folders. Create a new folder.
The last selected project cannot be found. Select
a different project.
The last selected folder cannot be found. Select
a folder.
Confirm that you want to load the selected
project.
Confirm that you want to load the selected
folder.
Confirm that you want to load the selected take. tttttttt = name of take to load
The project is loading.
The folder is loading.
The take is loading.
Confirm that you want you want to make a new
folder.
Creation of the folder failed.
The folder is being created.
The mark has been created.
The folder name is not allowed. A folder name
must not start with the "@" mark.
The call point does not exist.
The mark point does not exist.
The record function is not ON for any tracks.
The operation could not be completed for some
reason.
The maximum number of files and folders
that can be created has been reached, so the
operation could not be completed.
The selected project/folder/take could not be
found, so the operation could not be completed.
Rebuild the selected item.
Remarks
• Unlocked:
not synchronized with system
• no signal:
no signal is being input
• not audio:
Cbit information of input signal is
not audio
• not professional:
Cbit information of input signal is
consumer
• unmatched Cbit:
other Cbit information of input signal
is different from actual operation
mode
pppppppp = name of project to load
ssssssss = name of scene to load
ssssssss = folder name
You tried to skip marks before the Mark
point was accorded. This disappears
automatically after 2 seconds.
*** = project, folder or take