Online Functions; Enabling Online Functions; Activating Online Playback Mode - Tascam HS-8 Owner's Manual

Enabling online functions

In order to use online functions, in the online function
setting must be enabled.
1 Press the MENU key on the front panel to open the
screen.
MENU
2 Touch the "SYSTEM SETUP" button to open the
"SYSTEM SETUP" screen.
3 Touch the button of the
Enable
item to change the online function setting (default
value: ).
Disable

Activating online playback mode

When the online function is enabled, the online playback
mode can be activated by one of the following operations.
ONLINE event from connected parallel control
•
ONLINE command from connected RS-232C serial
•
control
ON LINE key pressed on connected RC-HS20PD remote
•
controller designed for use with this unit
When online playback mode is activated, the Home
Screen opens automatically, and the
screen appears red. When online playback mode is not
activated, the icon appears unlit on the screen.
ONLINE Function
icon on the
9 – Online functions
Relationship between the online playback mode and
sound output is as follows.
On line playback mode
Analog output (1-8)
Digital output (1-8, AES/EBU)
Digital output (1-8, ADAT)
Analog output (L/A, R/B)
Digital output (L/R)
Headphones
RC-HS20PD (Headhones, speaker)
* If "XLR Output Source" is set to "MONITOR", the
monitoring mix is output.
** The signal output is according to the "XLR Output
Source" setting.
*** The monitoring mix is always output.
Moreover, when online playback mode is activated, the
buttons operate as follows.
Playback status
ONLINE ON/OFF
Play
Fader Play
Stop
Fader Stop
FLASH
PAUSE
Track Skip
Mark Skip
CALL
Search
JOG
SHUTTLE
FLASH LOAD
MARK
MENU operation
PROJECT operation
Mark List
Manual locate
* If incremental play is set to ON, when you press the
stop key or lower the fader to stop playback, the unit
pauses at the beginning of the next track (Online
Ready).
** If you press a FLASH key to play a loaded take, the
take is changed to the corresponding one and flash
playback occurs. (If the take is not loaded, ordinary
playback begins.)
*** If you press a FLASH key when the unit is paused
and the fader is lowered (Fader Stop) the take is
changed and the unit stays paused. Otherwise, the
take changes and begins playing immediately (flash
playback).
NOTE
When the "ONLINE Function" item is set to "Disable" (the online
function is OFF), sound is output from all connectors.
Off On
ˆ ¨
ˆ ¨
ˆ ¨
¨* ¨**
¨* ¨**
¨*** ¨***
¨*** ¨***
Pause status
ˆ ¨
ˆ ˆ
ˆ ¨
¨* ¨
¨* ¨
¨** ¨***
–––
ˆ
ˆ ˆ
ˆ ˆ
ˆ ˆ
ˆ ˆ
ˆ ˆ
ˆ ˆ
ˆ ˆ
ˆ ˆ
ˆ ˆ
ˆ ˆ
ˆ ˆ
ˆ ˆ
59
TASCAM HS-8