Connecting Headphones; Setting The Inputs - Tascam HS-8 Owner's Manual

Connecting headphones

Connect headphones to the
the front panel. Keep the headphones knob turned
to (all the way to the left) when connecting
MIN
headphones.
Headphones
CAUTION
Before connecting headphones, turn the PHONES knob to the
minimum volume. Failure to do so could cause sudden loud noises
to occur, which might damage your hearing or equipment.

Setting the inputs

1 Press the key on the front panel to open the
MENU
screen.
MENU
2 Touch the
MIXER SETUP
screen.
SETUP
connector on
PHONES
button to open the
MIXER
4 − Recording and Playback
On the page, make settings for each
INPUT
channel's input source. For details, see "INPUT
page" on page 49.
3 If necessary, open the
pages to make additional settings.
OUTPUT
For details about the
"DIGITAL SOURCE page" on page 49.
On the page, you can edit channel names and
SETUP
turn channel links ON and OFF. To edit channel names,
touch the buttons next to the
see "CHx NAME (button)" on page 50.
Make output settings on the "OUTPUT" page. For
details, see "OUTPUT page" on page 49.
Input settings can also be changed on the
screens (" " is the channel). These screens can be
x
opened in two ways.
Touch a
•
CHANNEL SETUP
Touch a button at the top of the
•
CHANNEL
screen.
SETUP
, and
DIGITAL SOURCE SETUP
page, see
DIGITAL SOURCE
item. For details,
CH NAME
CHx SETUP
button on the screen.
MENU
MIXER
27
TASCAM HS-8