Mixer Settings (Mixer Setup); Input Page; Digital Source Page; Setup Page - Tascam HS-8 Owner's Manual

Mixer settings (MIXER SETUP)

Make mixer settings on this screen.
The screen has 4 pages:
MIXER SETUP
, and . Touch the tabs at the bottom
SOURCE SETUP OUTPUT
of the screen to open the corresponding page.

INPUT page

Make input settings on this page.
CHANNEL buttons
Press a channel button to open the corresponding
screen (" " is the channel).
SETUP x
INPUT SOURCE
Set the input source for each channel
Ana 1-8: 25-pin D-sub analog input (default setting)
•
Ana A-B: XLR analog input
•
AES 1-8: 25-pin D-sub AES/EBU input
•
AES A-B: XLR AES/EBU input
•
ADAT 1-8: ADAT input
•

DIGITAL SOURCE page

Set the digital input sources.
CHANNEL buttons
Press a channel button to open the corresponding
screen (" " is the channel).
SETUP x
DIGITAL SOURCE
Set the digital input source for each pair of channels.
AES x-x (default setting): 25-pin D-sub AES/EBU input
•
AES A-B: XLR AES/EBU input
•
ADAT x-x: ADAT input
•
6 – Internal Settings and Operations
Fs CONVERT buttons
Turn the sampling rate converter ON or OFF for each pair
of inputs (default setting: all
,
INPUT DIGITAL
Access the channel name editing screen and turn channel
links ON and OFF on this page.
CHANNEL buttons
Press a channel button to open the corresponding
SETUP
CHx
CH NAME
Touch these buttons to edit the name of the
corresponding channel.
CH Link
Touch these buttons to turn channel links ON and OFF.
(Default settings: all
The following parameters are shared by link channels.
•
•
•
•
•
•
Make settings related to output on this page.
CHx
XLR Output Source
Set the source to be output from the
R
L/R button (default value): Stereo mix

SETUP page

screen (" " is the channel).
x
)
OFF
2Mix LVL knob
Solo
Record arming
Input source
PAN pot (becomes balance)
Input monitor

OUTPUT page

and connectors.
DIGITAL OUTPUT L/R
).
OFF
CHx
ANALOG OUTPUT L/
49
TASCAM HS-8