Changing The Start Time Of A Take; Using "@" With Take Names - Tascam HS-8 Owner's Manual

4 Select the take that you want to erase. Touch the
button to enable the selection of
MULTI SELECT
multiple takes.
5 Touch the button to open a pop-up menu.
MENU
6 Touch the button in the pop-up menu.
DELETE
7 Touch the button or press the
OK
confirmation pop-up message appears.
During erasure, a progress status pop-up appears.
When erasure completes, the pop-up disappears.

Changing the start time of a take

1 Press the PROJECT key to open the PROJECT
screen.
2 Touch the " " button for the project that contains
®
the take for which you want to edit the start time
to open the folder selection screen.
3 Touch the " " button for the folder that contains
®
the take that you want to edit to open the take
selection screen.
4 Select the take that you want to edit.
5 Touch the " " button on the "
MENU
show the pull-up menu.
6 Touch the " " button in the pull-up menu to
EDIT TC
open the "
EDIT TAKE T/C
dial when a
DATA
" screen to
PROJECT
" screen.
7 On the "EDIT TAKE T/C" screen, and use the "FRAME
EDIT" button to set whether or not to input the
frame value.
Frame edit on
Frame edit off
8 Use the number buttons to input the take start
time.
If you begin input without selecting the digit, input
•
will start from the smallest one.
To input a specific digit, touch it and make its
•
background yellow, then use the number buttons or
the DATA dial to enter two digits at a time.
Touch the " " button to erase all entered values.
•
CLEAR
9 Touch the " " button to confirm the setting.
ENTER
TIP
This can also be edited using a PS/2 keyboard.
•
Press the PS/2 keyboard ESC key to erase all the values.
•
10 When the confirmation pop-up window appears,
touch the " " button or press the DATA dial.
OK

Using "@" with take names

Select a take and touch the "
add " " to the take name or remove it if it has been added
@
previously.
5 – Projects
" button to
CIRCLE @ TAKE
41
TASCAM HS-8