Tascam HS-8 Owner's Manual page 63

Message
Cannot RECORD.
Take limit reached.
Please change to another Folder
Cannot RECORD
Play Fs setting is not OFF
Please change Play Fs to OFF
Cannot Retake.
No Recent Take History.
Cannot set Mark point.
Mark limit reached.
Cannot turn Fs convert On.
CHn-n D-In is already
Master Clock.
CFn DEVICE ERROR
CFn Format failed
CFn has no projects.
Please create a project.
CFn is not available.
CFn is not usable
CFn MEDIUM ERROR
CFn not recommended format
for Recording/Playing.
CFn not recommended
for Recording/Playing.
(not UltraDMA)
CFn Read Error
CFn unrecognized format
Please Format this card.
CFn unsupported type
CFn Write Error
CFn(vvvvvvvv)
NUM OF PROJECTS : p
USED SIZE : u
FREE SIZE : f
TOTAL SIZE : t
Completed
Copy N selected folder
to CFn?
Copying folder...
Create new project?
""pppppppp""
""ssssssss""
Fs:**kHz, Frame Type:**F
Create Project failed
Creating Project...
Delete all marks
of this type?
(Count:N)
Delete N selected marks?
Delete N selected project?
Delete N selected folder?
Delete N selected take?
Deleting Project...
Deleting Folder...
Deleting Take...
Details and responses
Since the maximum number of recordable takes
or the take number has been reached, recording
is not possible. Change the folder.
Recording is not possible because PlayFs is set
to Pull-up or Pull-down. Set PlayFs to Off.
You cannot retake.
You cannot create more than 99 marks.
You tried to turn the sampling rate converter on
for the digital input that is selected as the master
clock.
The CF card cannot be recognized.
An error occurred during formatting, and
formatting could not be completed.
The CF card does not have even one project.
There is no CF card.
You cannot copy.
The unit failed to read the card.
The media was not formatted by this unit,
so proper recording and playback cannot be
guaranteed.
This card does not meet the specifications
required by the system, so using it for recording/
playback is not recommended.
An error occurred when reading the card.
This card has been formatted in a format other
than FAT. Format it for use with this unit.
This card does not meet the specifications
required by the system, so it cannot be used.
An error occurred when writing to the card.
This shows information about the CF card
The operation has completed.
Confirm that you want to copy the selected
folder(s).
The folder is being copied.
Confirm that you want to create a new project.
The creation of the project failed.
The project is being created.
Confirm the deletion of marks of the selected
type.
Confirm the deletion of the selected marks.
Confirm the deletion of the selected projects.
Confirm the deletion of the selected folders.
Confirm the deletion of the selected takes.
The project is being deleted.
The folder is being deleted.
The take is being deleted.
12 – Messages
Remarks
n-n = 1-2, 3-4, 5-6, 7-8
n = 1 or 2
n = 1 or 2
n = 1 or 2
n = 1 or 2
n = 1 or 2
n = 1 or 2
This appears when the card is formatted
with a cluster size that is smaller than the
standard of this unit.
n = 1 or 2
n = 1 or 2
n = 1 or 2
n = 1 or 2
n = 1 or 2
n = 1 or 2
vvvvvvvv = volume level
p: project number, u: capacity used
f: unused capacity, t: total capacity of CF
card
N = number of selected scenes
n = 1 or 2
pppppppp = name of project to be
created
ssssssss = name of first folder to be
created
N = number of marks of selected mark
type
N = number of marks
N = number selected
N = number selected
N = number selected
TASCAM HS-8
63