Tascam HS-8 Owner's Manual page 65

Message
Operation failed.
Internal File / Folder
limit reached.
Operation failed.
Path Name is too long.
Play Error.
Play Error
Buffer underrun
pppppppp
FOLDERS : n
Fs : f
TIMECODE : t
Project Delete failed.
Project Load failed.
Project Rename failed
Project save failed.
Project Screen
is not available
while Recording
Project Screen
is not available
in Jog Mode
Reading Media...
Reading Data...
Rebuild all Projects?
Rebuild current Project?
Rebuild current Folder?
Rebuild failed
Rebuild selected Project?
Rebuild selected Folder?
Rebuilding All...
Rebuilding project...
Rebuilding folder...
RECORD Error
RECORD Error
Buffer overflow
RECORD stopped.
Media Full.
Renaming Project
""pppppp""
to ""nnnnnn""
Renumber marks?
Screen Locked
Touch Panel Locked Out
Screen Locked
LCD Section Locked
Details and responses
The maximum number of files or folders has
been reached, so you cannot create a new folder.
The path name has more characters than
allowed, so the operation could not be
completed.
An error occurred during playback.
Data reading could not keep up
during playback.
This shows project information
Deletion of the project failed.
Loading of the project failed.
Changing the name of the project failed.
An error occurred while saving the project, and
saving failed.
Use the CLOSE button to close the pop-up
window.
The FAT file system might be broken.
Format the CF card or use a different one.
Formatting will erase all data on the card.
The "Project" screen cannot be changed during
recording.
The "Project" screen cannot be changed when in
jog mode.
The media is being read.
Data is being read.
Confirm that you want to rebuild all projects.
Confirm that you want to rebuild the current
project.
Confirm that you want to rebuild the current
folder.
Rebuilding failed.
Confirm that you want to rebuild the selected
project.
Confirm that you want to rebuild the selected
folder.
All projects are being rebuilt.
The project is being rebuilt.
The folder is being rebuilt.
An error occurred during recording.
The buffer became full during recording, and
writing to the card was too late.
The CF card ran out of space, so recording
stopped
The project is being renamed.
Confirm that you want to remember the marks
The touch panel has been locked to prevent
misoperation.
The LCD section has been locked to prevent
misoperation.
12 – Messages
Remarks
This message appears when making a
scene or recording results in a file path
name of more than 255 characters. This
can occur if you give projects and scenes
long names using a computer.
pppppppp = project name
n: number of folders
f: sampling frequency
t: type of timecode frame
pppppp = old project name
nnnnnn = new project name
TASCAM HS-8
65