Copying Folders - Tascam HS-8 Owner's Manual

5 Touch the button in the pop-up menu
REBUILD
item.
6 Touch the button or press the
OK
confirmation pop-up message appears.
During rebuilding, a progress status pop-up appears.
When rebuilding completes, the pop-up disappears.
NOTE
You can also rebuild a folder from that folder's take selection screen.

Copying folders

You can copy folders between CF SLOT 1 and CF SLOT 2
(two CF cards are necessary).
If you copy a folder, the same directory structure is created
at the copy destination.
NOTE
To play copied folders on this unit, you must rebuild the desti-
•
nation project or the folder.
If you copy a folder with a different sampling frequency into a
•
project, the folder cannot be rebuilt.
1 Press the key on the front panel to open
PROJECT
the screen.
PROJECT
2 Press the "®" button for the project that contains
the folder that you want to copy to open the folder
list.
3 Select the folder that you want to copy. Touch the
button to enable the selection of
MULTI SELECT
multiple folders.
4 Touch the button on the
MENU
open a pop-up menu.
dial when a
DATA
screen to
PROJECT
5 Touch the button in the pop-up menu.
COPY
6 Touch the button or press the
OK
confirmation pop-up message appears.
During copying, a progress status pop-up appears.
When copying completes, the pop-up disappears.
NOTE
If a folder with the same name already exists on the destination
CF card, a message confirming that you want to overwrite the
existing scene appears. Touch the OK button or press the DATA dial
to overwrite the existing file and copy the selected scene to the
destination.
5 – Projects
dial when a
DATA
39
TASCAM HS-8