Operation; Switching The Appliance On; Inserting Paper - UNITED OFFICE UAV 300 A1 Operating Instructions And Safety Instructions

Operation

Switching the appliance on

NOTE
► Ensure that the cutter attachment
collector
♦ Move the REV/OFF/AUTO/FWD switch
shredding . The power lamp
appliance is now ready for use .

Inserting paper

CAUTION! PROPERTY DAMAGE!
Never feed paper into the cutter opening
clips or staples larger than 25 mm attached! These could damage
the cutting blades .
NOTE
You can shred up to 10 sheets (80 g/m
max.
10
x 80g/m
Fig . 3
NOTE
► Regularly remove any residue left in the cutting blades with a suitable
object (e .g . brush or tweezers) . Ensure that the appliance is unplugged
before doing this .
UAV 300 A1
.
w
4
Insert paper into the middle of the cutter opening for
paper from above and in portrait format (see fig . 3) .
9
The appliance starts automatically and switches itself off
automatically if no further paper is inserted .
is sitting correctly on the large waste
6
to the AUTO position for
3
lights up permanently blue and the
if it still has paper
9
paper) at the same time .
2
GB │ IE │ NI
│ ■
7