Table of Contents
Advertisement
2.1 Unpacking the
CFP-102
2.2 CFP-102
Overview
Section 2: Preparing to Install
the CFP-102 Fire Panel
The basic CFP-102 package includes the following components:
Cabinet with hinged door
Display and control plate c/w display and control printed circuit board.
Zone label insert
Battery compartment dead front plate
Main control PCB
Transformer
Installation manual
Hardware pack
• 2 × NAC EOL resistors (4.7 K, 5%, ½ W)
• 5 × Zone EOL resistors (4.7 K, 5%, ½ W)
• 1 × Battery jumper wire
• 1 × EGND terminal ring
• 1 × EGND KEP nut
Door keys (taped to outside of cabinet)
All components described above are factory assembled into the enclosure.
2.1.1 Accessories
Model Number
Name
MRD-EOL4.7K
EOLR
MRD-MP400
EOLR plate
CFP-102 cabinet with door closed
firealarmresources.com
Description
End-of-Line resistor for NAC and Initiating circuits.
Mounts in the field.
Single gang plate with EOL resistor. Mounts to a single
gang electrical backbox.
CFP-102 display and controls
3
Advertisement
Table of Contents
