Display Console - Elite Fitness VO2 Assembly Manual

DISPLAY CONSOLE

The things you should know before exercise:
SLEEP MODE:
The monitor will enter SLEEP mode (LCD off) when there is no signal or key input within 4 minutes.
Functions and Features:
1) SCAN: At the exercise mode, press the MODE key until SCAN appears on the LCD. Monitor will
then display the following functions, and each function will pause for 6 seconds on the
main screen, TIME- SPEED- DISTANCE- CALORIE- RPM- PULSE
2) TIME: Shows your elapsed workout time in minutes and seconds. Your computer will
automatically count up from 0:00 to 99:59 in one second intervals. You many also program your
computer to count down from a set value by using the UP and DOWN keys from 0:00 to 99:00.
If you continue exercising once the time has reached 0:00. The computer will begin beeping,
and counts up from 0:00.
3) SPEED: Displays your workout speed value in KM per hour from 0.0 to 168.0, or MILE per hour
from 0.0 to 99.9.
4) DISTANCE: Displays the accumulative distance travelled during each workout, up to a maximum
of 168.0KM or 99.9 MILES.
5) CALORIES: Your computer will estimate the cumulative calories burned at any given time during
your workout.
6) PULSE*: Your computer displays your pulse rate in beats per minute during your workout.
If no pulse signal input then the computer will display 0 on the window.
* Hand Pulse Sensors can provide inaccurate heart rate readings and are indicative only.
7) RPM: Your pedal cadence.
ELITE VO2 EXERCYCLE ASSEMBLY MANUAL 15