Elite Fitness VO2 Assembly Manual page 12

STEP 4
Attach the Handlebar and Meter.
— Put handlebar (3) with 2 hand pulse (34), grip (60) to the top welded shape handlebar bracket
of the front post (2).
— Fasten rear clamp cover (14) to the post tube with flat washer (55) and screw (40).
— Fasten rear clamp cover (14) with BUSHING (32), flat washer (51) and T-knob (31).
— Attach front clamp cover (14) to the front post (2) and fasten rear clamp cover (14)
with flat washer (55), screw (44) and 2 screw (38).
— Remove the pre-assembled screw (41) from the console meter (8). Connect the plug of the
middle section sensor wire (59) to the sensor socket of console meter (8). Insert the console
meter (8) into front post (2) and fasten with 4 screw (41). Insert the plug of hand pulse wire
to the back of console meter (8).
12