TVS Stryker 3V 2021 Manual page 28

KNOW YOUR TVS STRYKER 3V
HANDLE BAR RIGHT SIDE
1. Engine cut off switch
It is used to switch off '
other DC system active. The ignition circuit is
disabled, preventing the engine from being restarted.
To restart the engine, return the switch to the '
position.
1
4
' the engine but to keep
'
2
3
2. Front brake lever
The front brake is applied while squeezing the front
brake lever gently towards the throttle grip. The brake
lamp glows on application of front brake.
3. Throttle grip
Engine speed is controlled by the rotation of the
throttle grip. Twist it towards you to increase the
engine speed and away from you or release it to
decrease the engine speed.
4. Electric starter switch
Press the electric starter switch '
engine electrically with the transmission is in neutral
or by depressing the clutch lever when the
transmission is in gear.
Note
Ensure to turn ON the engine cut-off switch before
starting the vehicle.
Release the electric starter switch immediately after
pressing.
' to start the
23