TVS Stryker 3V 2021 Manual page 58

MAINTENANCE
FRONT WHEEL REMOVAL AND REASSEMBLY
1. Remove the axle nut (1) along with a washer.
2. Pull out the axle (2) from the front wheel.
3. Incase of disc brake model, remove the spacers
from both side of the wheel. Incase of drum brake
model remove a spacer from right side of the
wheel.
4. Place a support below the frame to prevent the
vehicle from falling and lift the vehicle up.
5. Incase of drum brake model, dislocate the wheel
assembly along with the brake panel.
1
6. Separate the brake panel from the wheel and take
out the wheel.
7. Incase of disc brake model, carefully dislocate the
disc from the caliper assembly and slide the wheel
out.
8. Reverse the procedure for reassembling.
Always make sure that whenever the wheel is
removed, axle nut is properly re-tightened to the
specified torque.
2
Warning
53