Clock Setting - AC Infinity AIRLIFT Series User Manual

PROGRAMMING

CLOCK SETTING

Adjusts the current clock time. Press the up or
down button to increase or decrease the time.
Once you cycle through 12:00 each time, the
units will automatically change to AM or PM.
The clock time is located at the top right corner
of the display.
CALIBRATION TEMPERATURE SETTING
Adjusts the temperature reading the sensor
probe is measuring. Press the up or down
button to increase or decrease the data figure
in 2°F (or 1°C) increments. The calibration
cycle ranges from -8°F to 8°F (or -4°C to
4°C) and will be applied to the sensor probe's
measurements.
CALIBRATION HUMIDITY SETTING
Adjusts the relative humidity reading the sensor
probe is measuring. Press the up or down
button to increase or decrease the data figure
in 1% increments. The calibration cycle ranges
from -8% to 8% and will be applied to the
sensor probe's measurements.
23