AC Infinity AIRLIFT Series User Manual page 20

PROGRAMMING
TIMER TO OFF MODE
Pressing the up or down button sets a countdown
time. The fans will run at the speed set in ON Mode
until the countdown ends. If there is a speed set in
OFF Mode, the fans will run at that speed after the
end of the countdown.
The countdown will begin if no buttons are pressed
for 5 seconds. The time left on the countdown is
displayed below the current fan speed. Leaving
the timer mode while the countdown is running will
pause it until you return to this mode.
CYCLE MODE (ON AND OFF)
Set an on duration and an off duration for the fan to
cycle through continuously. Press the up or down
button to first set a duration for the fan to activate.
Then press the mode button again and set a
duration for the fan to deactivate. When the fan is
activated, it will run at the speed set in ON Mode.
When the fan is deactivated, it will run at the speed
set in OFF Mode.
The countdown will begin if no buttons are pressed
for 5 seconds. The time left on the countdown
before the next on or off phase is displayed below
the current fan speed. Leaving the cycle mode
while the countdown is running will pause it until
you return to this mode.
20
If there is a speed set in OFF Mode other
than zero, the fans will run at that speed
when triggered to turn off.
If there is a speed set in OFF Mode other
than zero, the fans will run at that speed
when triggered to turn off.
PM
TO
OFF
OFF