Memory; Removing The Memory - Dell OptiPlex 5000 Small Form Factor Service Manual

Hide thumbs Also See for OptiPlex 5000 Small Form Factor:
Table of Contents

Advertisement

Memory

Removing the memory

Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
2.5-inch
4. Remove the
3.5-inch
5. Remove the
hard-drive and optical-drive
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
Steps
1. Carefully spread apart the securing-clips on each end of the memory-module slot.
2. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module
NOTE:
Repeat step 1 to step 2 to remove any other memory modules installed in your computer.
NOTE:
Note the slot and the orientation of the memory module in order to replace it in the correct slot.
before working inside your
hard-drive.
hard-drive.
cage.
computer.
Removing and installing components
55

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OptiPlex 5000 Small Form Factor and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Optiplex 5000-3m0ph sffD17s

Table of Contents