Steps
Insert the coin-cell battery into the socket with the positive side (+) label facing up and snap the battery in the socket.
Next steps
1. Install the
hard-drive and optical-drive
2. Install the
3.5-inch
hard-drive.
3. Install the
2.5-inch
hard-drive.
4. Install the
side
cover.
5. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch
5. Remove the
3.5-inch
6. Remove the
hard-drive and optical-drive
bracket.
after working inside your
before working inside your
hard-drive.
hard-drive.
cage.
computer.
computer.
Removing and installing components
45
Need help?
Do you have a question about the OptiPlex 5000 Small Form Factor and is the answer not in the manual?
Questions and answers