Installing The Hard-Drive And Optical-Drive Bracket - Dell OptiPlex 5000 Small Form Factor Service Manual

4. Hold the lock handle to lift the bracket.
5. Lift the bracket upwards and detach it from the mounting points on the top portion of the chassis.
6. Disconnect the power and SATA cables from the optical drive and lift the bracket away from the computer.

Installing the hard-drive and optical-drive bracket

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the hard-drive and optical-drive bracket and provides a visual representation of the
installation procedure.
Removing and installing components 29