Hard-Drive And Optical-Drive Bracket; Removing The Hard-Drive And Optical-Drive Bracket - Dell OptiPlex 5000 Small Form Factor Service Manual

Steps
1. Align the mounting points on the carrier with the slots on the hard drive.
2. Snap the 3.5-inch hard-drive onto the hard-drive carrier.
3. Align the tabs on the hard-drive carrier with the slots on the chassis and snap the hard-drive carrier onto the disk-drive
cage.
NOTE: Use the arrows seen on the caddy as guides to identify the tabs on the tray.
4. Connect the hard-drive data and power cables to the connectors on the hard drive.
Next steps
1. Install the front bezel.
2. Install the side cover.
3. Follow the procedure in

Hard-drive and optical-drive bracket

Removing the hard-drive and optical-drive bracket

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5-inch
5. Remove the 3.5-inch
after working inside your
before working inside your
hard-drive.
hard-drive.
computer.
computer.
Removing and installing components 27