Protocol/ Baud Rate Setting (Dip Sw1-9~10) - Speco 10X PAN-TILT HTSD10X User Manual

DIP SWITCH SETTING
A-3. PROTOCOL
th th
7 ~8 dip switches are used for Protocol Setting.
Factory Default: Pelco-D or Pelco-P ( Auto detection)
DIP SW 1- 7
OFF
A-4. BAUD RATE SETTING
th
The 9 Dip Switch is used for BAUD RATE setting.
DIP SW can be changeable to 2400bps, 9600bps.
Factory Default: 2400bps.
DIP SW 1 9
.
A-5. 485 TERMINATIONS
th
10 Dip Switch is used for 100 termination.
th
Set on 10 Dip Switch only for the last looped camera from the controller.
Even in case of only one camera, set on 10
DIP SW 1- 8
OFF
th
OFF
ON
th
Dip Switch of the cameras.
Pelco-D or Pelco-P
BAUD RATE
2400
9600
26