Setting Up The I-2533Cs Series - ICP DAS USA I-2533CS Series User Manual

Hide thumbs Also See for I-2533CS Series:

Table of Contents

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ

4.2. Setting up the I-2533CS series

After installing the utility tool, please follow the following steps to set up the

communication between the Utility and the I-2533CS series. Here is the example for the

I-2533CS configuration.

Step 1: Power off the I-2533CS.

Step 2: Set the rotary switch to 'F' and connect the PC available COM port with the

COM port of the I-2533CS. Users can find the communication cable (CA-0910)

in the product box. When connecting to the COM port of I-2533CS, the TXD pin

of the cable is connected to the TXD pin of the I-2533CS COM port, RXD pin of

the cable is connected to the RXD pin of the I-2533CS COM port, and GND pin

of the cable is connected to the GND pin of the I-2533CS COM port.

Step 3: Power on the I-2533CS. Then, the CAN_Err, CAN_Tx, CAN_Rx, FB_Err LEDs

will take turns to flash per 500 milliseconds.

Step 4: Execute the I-2533CS Utility tool.

I-2533CS series CAN to Single Mode Fiber Bridge User Manual (version 1.0.0)

+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

Figure 4-1 Wire connection of the RS-232

Page:

Table of Contents

I-2533csI-2533cs-60 I-2533cs-a I-2533cs-b