ICP DAS USA I-2533CS Series User Manual page 17

Hide thumbs Also See for I-2533CS Series:

Table of Contents

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ

The following DIP switch statuses present the "Module Group ID" value.

Dip switch statuses

The following "Module Group ID" values of device A and B present these ID are in the

same group which can communicate with each other.

Device A Group ID value

For example, there are three CAN networks, Network A, Network B and Network C, and

each of them uses one I-2533CS. The Group IDs of the I-2533CSs are 1, 2, and 3

respectively. The Network A can exchange the data with Network C because the Group

IDs of the I-2533CSs are in the same group (the second rule in the above table). The

Network B can exchange the data with Network C, which follows the third rule in the

above table. The Network A can't connect with the Network B because these two

I-2533CSs are not in the same group.

Note:

The I-2533CS-A and I-2533CS-B don't support the Group function. When using the

I-2533CS-A and I-2533CS-B, the Group ID of them must be the same.

I-2533CS series CAN to Single Mode Fiber Bridge User Manual (version 1.0.0)

+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

Table 2-4 Group ID Description

Table 2-5 Group of "Module Group ID"

Group ID value

Device B Group ID value

01 or 03

02 or 03

01 or 02 or 03

Page:

Table of Contents

I-2533csI-2533cs-60 I-2533cs-a I-2533cs-b