Nilfisk-Advance MC 6P Service Manual page 40

Pic. F7: Valve housing
Disassemble the valve housing from the
•
cylinder block by the 8 bolts.
Be aware of the o-rings and valve parts.
•
Pic. F9: Cylinder head
Carefully tip out the sleeves with an
•
adequate puller or screwdriver and
replace them. Be careful not to scratch
the surface.
SM_MC_6P Ver.2.0_2021
Service / Repair
Pic. F8: Thrust collar
•
•
Pic. F10: Cylinder head
Suction valves
Be carefull not to damage the surface
inside when disassembling the thrust
collar.
Inspect the thrust collar for damages
before assembling.
F
Pump valves
40