Polaris SLINGSHOT S 2019 Owner's Manual page 84

MAINTENANCE
3. Remove the bolt and nut securing the bracket
radiator mount.
4. Remove the air filter
5. Inspect the air filter. Shake the filter to remove excess dirt. If the filter remains
caked with dirt, replace the filter with a new filter.
6. If replacing the air filter, remove the nut
bracket and nut on the new air filter.
7. Reinstall the air filter, or install a new air filter, with the clamp.
Operating the vehicle without the air filter installed can result in serious engine
damage, which could result in an accident and injury to the operator and
8. Install the bolt and nut, securing the bracket to the passenger side top
radiator mount.
82
Downloaded from ManualsNet.com
r
.
Nut: 3.3-3.75 ft-lbs (4.5-5.1 Nm)
others. Always make sure the air filter is installed.
Bolt: 7-9 ft-lbs (9.5-12.2 Nm)
search engine
w
to the passenger side top
e
and bracket, and reinstall the
TORQUE
NOTICE
TORQUE