Polaris SLINGSHOT S 2019 Owner's Manual page 68

MAINTENANCE
• Improperly installed or adjusted components can result in a system failure. If
you do not have the time, tools and expertise necessary to complete a
procedure properly, please see your dealer or another qualified person for
service.
• Review the safety-related maintenance information on page 16.
• Before beginning any maintenance procedure, read the instructions for the
entire procedure.
• Always position the vehicle on a firm level surface before performing service.
• Wear eye and face protection when using pressurized air.
• Never start the engine or let it run in an enclosed area. Engine exhaust fumes
are poisonous and can cause loss of consciousness or death in a short time.
• During some procedures you may use potentially hazardous products such as
oil, coolant, or brake fluid. Always follow the instructions and warnings on the
product packaging.
ELEVATING THE VEHICLE FOR SERVICE
Serious injury or death can occur if the vehicle moves or falls while elevated.
When elevating is necessary, make sure the vehicle is properly elevated and
Some procedures require elevating the vehicle. DO NOT attempt to elevate your
vehicle without proper equipment. If you're not familiar with using floor jacks or
lift mechanisms, see your dealer for service.
To elevate the SLINGSHOT vehicle, use automotive-quality floor jacks. Use the
floor jacks on a firm, flat surface.
Make sure the floor jacks are positioned under the frame rails in the front where
the lower control arm mounts to the frame, or in the rear where the frame rails
meet.
For fluid changes, always make sure the elevated vehicle is level.
Bottom View of Lift Points
66
Downloaded from ManualsNet.com
WARNING
stable before performing service.
search engine
Side View of Lift Points