Polaris SLINGSHOT S 2019 Owner's Manual page 65

CANCEL CRUISE CONTROL
To temporarily cancel the cruise control and allow use of the resume feature,
perform one of the following:
• depress the brake pedal or
• depress the clutch pedal
To cancel the cruise control and erase the set speed from memory, move the
ON/OFF/RES switch to OFF.
RESUME SPEED
1. Disengage the cruise control by depressing the brake pedal or clutch pedal.
If you depress the throttle pedal to accelerate, the cruise control will resume
2. Move the ON/OFF/RES switch to RES to resume operation at the previously
set speed.
Moving the ON/OFF/RES switch to OFF will erase the set speed from memory
INCREASE SPEED SETTING
Move and release the ON/OFF/RES switch to RES to increase the set speed in
approximately one MPH (1-2 km/h) increments. Move and hold the ON/OFF/
RES switch in the RES position to accelerate to a new SET speed. The speed
will reset when the switch is released or after a maximum acceleration of
approximately 10 MPH (16 km/h), whichever comes first.
REDUCE SPEED SETTING
Press and release the SET switch to decrease speed in approximately one MPH
(1-2 km/h) increments. Press and hold the SET switch to decelerate to a new
SET speed (resets when switch is released), or to the minimum cruise speed of
25 MPH (40 km/h).
Downloaded from ManualsNet.com
the previously set speed when the pedal is released.
and disengage the cruise control.
search engine
NOTE
NOTE
OPERATION
63