Polaris SLINGSHOT S 2019 Owner's Manual page 37

• The anti-lock brake system will not prevent wheel lockup, loss of traction or
loss of control under all conditions. Always adhere to all safe operating
practices as recommended.
• It is not unusual to leave tire marks on the road surface during a hard braking
event.
• The anti-lock brake system does not compensate for or reduce the risks
associated with:
– excessive speed
– reduced traction on rough, uneven or loose surfaces
– poor judgment
– improper operation
– hydroplaning
PARK BRAKE LEVER
The park brake lever is located between the seats. To help prevent the vehicle
from rolling, engage the park brake when the vehicle is parked. When the park
brake is engaged and the park brake indicator is illuminated, the vehicle will not
move. Always apply the brakes before engaging or releasing the park brake.
1. To engage the park brake, apply the brakes. Pull the park brake lever upward
as far as possible.
2. To release the park brake, apply the brakes. Press the park brake release
inward and move the lever downward as far as possible.
Always make sure parking brake is fully released before attempting to move
the vehicle. Failure to do so can cause damage to the rear brakes.
Downloaded from ManualsNet.com
FEATURES AND CONTROLS
WARNING
search engine
q
35