Polaris SLINGSHOT S 2019 Owner's Manual page 25

HAZARD SWITCH/EMERGENCY FLASHERS
All turn signals flash when the emergency flashers are
activated. Press the top of the hazard switch to turn
the flashers on. Press the bottom of the switch to turn
the flashers off. The ignition switch does not have to
be on to activate the flashers.
MASTER LIGHTING SWITCH (CANADA)
The master lighting switch must be in the ON position to allow operation of the
high beam headlights.
ONE-TOUCH STARTER SWITCH
Use the one-touch starter switch to start the engine. Read the engine starting
procedures before starting the engine. See the Starting the Engine section for
details.
MODE BUTTON
The mode button is located on the dashboard near the instrument cluster.
Use the mode button to toggle through the modes of the multi-function display.
See page 27. Use the mode button to set the display units to either standard or
metric units of measurement. See page 28.
ELECTRONIC STABILITY PROGRAM (ESP) SWITCH
The ESP is active by default. This feature helps reduce the risk of accident by
providing traction control and stability control. If ESP senses a loss of stability
due to loss of traction (skidding) the ESP intervenes by automatically applying
brakes to one or more wheels and reducing power to the rear wheel.
No stability control, traction control or anti-lock braking system can fully protect
you from every situation. Always be mindful of road conditions. Always drive
safely and within the limits of the driver, vehicle and road conditions.
Stability control, traction control and anti-lock braking systems rely on grip
between the tires and the road to function properly. In a hydroplane situation,
tires lose contact with the road and the effectiveness of these features may be
Downloaded from ManualsNet.com
FEATURES AND CONTROLS
WARNING
WARNING
diminished.
search engine
23