Polaris SLINGSHOT S 2019 Owner's Manual page 73

ENGINE OIL / FILTER CHANGE
Always check and change the engine oil at the intervals outlined in the Periodic
Maintenance Chart. Always change the oil filter whenever changing oil.
1. Position the vehicle on a level surface. Place the transmission in neutral.
Engage the park brake.
The engine must be at normal operating temperature when checking or
changing the oil. Do not check or change the oil when the engine is cold.
2. Start the engine and allow it to idle for 2-3 minutes. Stop the engine.
Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
3. Clean the area around the drain plug at the bottom of the crankcase.
4. Place a drain pan under the drain plug. Remove the drain plug. Allow the oil
to drain completely.
5. Clean the sealing surfaces of the drain plug and oil pan. The sealing surfaces
should be clean and free of burrs, nicks or scratches.
6. Reinstall the drain plug. DO NOT overtighten.
Downloaded from ManualsNet.com
NOTE
CAUTION
TORQUE
18 ft-lbs (25 Nm)
search engine
MAINTENANCE
71