Polaris SLINGSHOT S 2019 Owner's Manual page 33

RIDE COMMAND™ BUTTONS
BUTTON
RIDE COMMAND™ SETTINGS
The Settings Menu is where you can personalize your Navigation System. You
can configure settings, such as Language, Speed Units, Time Formats, as well
as audio and vehicle settings. The Settings Menu is composed of 4 categories
that allow you to customize your screens; General, Time, Audio, and Vehicle.
GENERAL
From the General settings menu you can do the following:.
• Change the Language
• Set the Speed Units (MPH or KPH)
• Set the Temperature Units (F or C)
Downloaded from ManualsNet.com
Rider Screen Button
Navigation Button
Bluetooth Button
Power Button
Audio Button
Volume Decrease
Button
Volume Increase
Button
search engine
FEATURES AND CONTROLS
FUNCTION
Press the Rider Screen button to access
the customizable split screen menu
system, access to ride data, vehicle
status, and vehicle information.
Press the Navigation button to access
Ride Command™ navigation features (if
equipped), find directions, and look up
addresses, gas stations, and other points
of interest.
Press the Bluetooth button to pair a
phone or headset to the Ride
Command™ display.
Press the Display On/Off button to turn
the Ride Command™ display on and off
while motorcycle is in use.
Press the Audio Button to change the
audio source, and set radio presets.
Press the Volume Decrease Button to
adjust the volume downward.
Press the Volume Increase Button to
adjust the volume upward.
31