Step 3 Checking Reading - Omron V530-R150 Operation Manual

STEP 3 Checking Reading

5-5 STEP 3 Checking Reading
Confirm whether reading is performed correctly under the setting
conditions. The reading is performed in MON (monitor) mode.
Reading judgment is not output to terminal blocks or RS-232C
but displayed on the monitor.
Procedure
82
1
Press the ESC Key from the basic screen of setting mode to
enter MON (monitor) mode.
1.Read QRCode
2
Press the TRIG Key on the Console.
One reading is performed. A trigger can be input via terminal
blocks or RS-232C. Reading judgement is not output to the
terminal blocks or RS-232C but displayed on the monitor.
QRCode ABCDE12345
Section 5-5