Step 1 Starting - Omron V530-R150 Operation Manual

STEP 1 Starting

5-3 STEP 1 Starting
Procedure
Note Never input the reset signal or turn OFF the power when startup
messages are displayed. Data may be lost, and the V530-R150
may not operate properly the next time it is started.
1
Be sure that the basic V530-R150 components have been
connected correctly.
2
Turn ON the power supply on the monitor.
3
Turn ON the power supply on the V530-R150.
A startup message appears followed by a processing mes-
sage. After a short pause, the initial screen appears. The fol-
lowing screen appears the first time power is turned ON.
4
Be sure that the 2-dimensional code is correctly displayed
within the field of vision on the monitor.
Section
p. 9
5-3
71