Table of Contents
Advertisement
Communication Settings
4-2
Communication Settings
4-2-1
Normal Communications Mode
If the Normal communications mode is selected, data can be out-
put in normal format to an external device via the RS-232C port.
Communications method setting menu
I/O via the RS-232C Port
V530
Execute command
Output judgment
A timeout error occurs if there is no response from the host com-
puter within the set time when RS/CS or Xon/off is selected for
flow control. An ERR (error) message appears on the screen,
and the error terminal turns ON.
Program example
The BUSY terminal turns ON while readings are being performed.
Host computer
Input command
Gate ON time varies according to data vol-
ume and baud rate.
Receive judgment
p. 63
Section
4-2
p. 140
41
Advertisement
Table of Contents
