Table of Contents
Advertisement
MON (Monitor) Mode
6-3
MON (Monitor) Mode
Confirms whether the reading can be correctly performed with
the set conditions.
The reading judgment and data are not output to the terminal
blocks or RS-232C but displayed on a monitor.
Procedure
Reading Judgment
NG will be displayed when reading is
not performed correctly or reading
data is not coincident with registered
data for coincidence judgments 0 to 3.
Displayed Images. Press the SHIFT + Up/Down Keys to switch images.
1
Enter MON (Monitor) mode.
MON (monitor) mode automatically moved to after leaving
SET mode.
2
Input reading trigger.
Console
One reading is performed when the TRIG Key is pressed
once.
Terminal Block
RS-232C
p. 46, 52
p. 25
QRCode ABCDE12345
Section
6-3
Reading Time
129
Advertisement
Table of Contents
