Table of Contents
Advertisement
System
6-5
System
6-5-1
Communications Method
Sets communications methods when communicating to external
devices via terminal blocks or RS-232C.
RS-232C
Baud rate
Data length
Parity bits
Stop bits
Header
Footer
FCS
Attach digit no.
Mode
140
When communicating in normal format via RS-232C:
Set the communications method for RS-232C and Normal .
When communicating with host link via RS-232C:
Set the communication method for RS-232C and Host link .
When inputting trigger or outputting reading results (OK/NG) to
the OK/NG terminals on terminal blocks:
Set the communications method for Terminal block .
1
Select 2400, 4800, 9600, 19200, or 38400 (bps).
(Default setting: 38400)
2
Select 7 or 8 (bits). (Default setting: 8)
3
Select None, Odd, or Even. (Default setting: None)
4
Select 1 or 2 (bits). (Default setting:1)
Section
38400 bps
8bit
None
1bit
None
CR
OFF
OFF
Normal
6-5
Advertisement
Table of Contents
