Step 1 - Inventory Of Parts - Uplift Desk V2 Manual

P1
H1
Desk Assembly Instructions
P2
H1

Step 1 - Inventory of Parts

A. For ease and safety, we recommend using two people for
assembly. Before assembly, consider where you want your desk
to be located. Since your new desk is height adjustable, you
will want it located a safe distance from anything that could
obstruct the desk from being raised or lowered (like a wall-
mounted shelf or cabinet). With an Advanced Keypad, you can
set the upper and lower height limits for your desk to avoid any
potential collisions.
B. To avoid any damage to your floor or desktop, we recommend
assembling your desk on a debris-free carpet or blanket.
C. Ensure you have received all components and hardware before
disposing of any packing material. Lay out the components
from all boxes and make sure the items and quantities match
what is shown in each of the package contents sections in
these instructions.
D. The included Allen Wrench Handle
leverage and better grip while tightening frame screws. Insert
the 4 mm Allen Wrench
number "4". Push the Allen Wrench all the way into the slot of
the handle until it "snaps" securely into place.
Step 2 - Crossbar End Attachment
A. Place one of the Crossbar Ends
B. Position one of the legs
back of the Crossbar End are aligned and flush.
C. Using the 4 mm Allen Wrench (H6), loosely insert four M6x10
Machine Screws (H1)
the leg as shown, but do not tighten them.
D. Once all four screws have been started, tighten them using the
Allen Wrench.
E. Repeat this step for the remaining three Legs and Crossbar
Ends.
(H15) provides increased
(H6) into the side marked with the
(P2) upside down as shown.
(P1) so that the back of the leg and the
through the Crossbar End holes and into