Uplift Desk V2 Manual

Standard 2-leg height adjustable c-frame

Hide thumbs Also See for V2:

Manual (21 pages)

Instructions manual (21 pages)

Assembly instructions manual (16 pages)

Table Of Contents

Table of Contents

Quick Links

V2 Standard 2-Leg

Height Adjustable C-Frame

two person

assembly

For assembly assistance,

visit upliftdesk.com/2leg-srd or scan QR code,

355 lb

call 800-349-3839 or email support@upliftdesk.com

upliftdesk.com/2leg-srd

ATTENTION: If you are assembling a 3-leg desk, refer instead to the 3-leg

instructions in the 3rd Leg Box, and disregard this 2-leg instruction booklet.

Table of Contents

Summary of Contents for Uplift Desk V2

Page 1 355 lb call 800-349-3839 or email support@upliftdesk.com upliftdesk.com/2leg-srd ATTENTION: If you are assembling a 3-leg desk, refer instead to the 3-leg instructions in the 3rd Leg Box, and disregard this 2-leg instruction booklet. Patent Pending, ©2018 UPLIFT Desk®. All Rights Reserved...
Page 2 Thank you for choosing UPLIFT Desk. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 3 Under no circumstances does the manufacturer accept warranty or liability claims for damages caused from improper use or handling of this desk. Provide this manual to any new user. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 4 (qty 4) Phillips-head screwdriver ATTENTION: If you are assembling a 3-leg desk, refer instead to the 3-leg instructions in the 3rd Leg Box, and disregard this 2-leg instruction booklet. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 5 Rotate each screw by hand for only a few turns to avoid cross-threading. Once both screws are started, tighten all the way us- ing the 4mm Allen wrench (H6). Repeat this step for the 2nd Leg. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 6 Check that the frame assembly is in the right location prior to drilling by confirming that your marks are lined up. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 7 Steps 6 and 7. After all eight screws are started, go back and tighten them all the way. Be careful to not over-tighten, to avoid stripping. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 8 Crossbar end (C5). See diagram below. Top view of Control box tabs & Crossbar end slot. This is just an il- lustration, you won’t be able to see this when installing. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 9 Use it with a 1/8” diameter drill bit and, ensuring that you DO NOT DRILL DEEPER THAN 1/2”, drill pilot holes where you’ve made your marks. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 10 Be careful not to miss the screws marked with an arrow in the diagram. Don’t forget that one of the screws is under the Control box. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 11 Your desk is now ready for use! If you are using a Memory keypad, see additional key- pad instructions for further information on how to use your keypad © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 12 4. Hold the DOWN button until the desktop lowers slightly, then raises slightly, and the display changes back to the numeric height setting, then release. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 13 To set new minimum and maximum height settings outside of the current settings, you will need to first remove the current minimum and maximum settings. © UPLIFT Desk • 800-349-3839 • 512-614-3152 • info@upliftdesk.com • upliftdesk.com...
Page 14 If the error message persists after performing the Reset procedure, or if there is a height difference between the legs which exceeds 1.5’’, contact UPLIFT Desk at the email address or phone numbers listed at the bot- tom of each page of these instructions.
Page 16 Copyright Notice: This guide is a component of the UPLIFT Desk™. This guide is a part of the scope of delivery, even if the item is resold. This guide ©...

Uplift Desk V2 Manual

Quick Links

Related Manuals for Uplift Desk V2

Summary of Contents for Uplift Desk V2

Table of Contents