Alarm Clock Set - Hyundai PPR 289 Instruction Manual

Portable radio with alarm cl
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8
DESCRIPTION

ALARM CLOCK SET

1) Press MODE button to enter the alarm settings interface, then you can set the alarm switch
(
Display alarm open, turn off the alarm when no show), The whole point timekeeping
(
Show the whole point of time when open, no show for the whole point of time when
the closed), Alarm time setting (hours/minutes) flashes when set state.
2) Open the whole point of time when, When each integral point the loudspeaker can send out
"bi" ,Open the alarm when the alarm clock every time established, Every time the alarm set,
Speaker will be a "beep" sound, and for 30 seconds is over, the alarm time, MODE button
or SET button can knot ring alarm tone. (Alarm or shutdown time, whether in radio or
in the volume settings can be heard in the most hours, and adjust the volume level will not
be affected, if the rings are listening to music, will hear music with the downtown ring)
3) Time and the alarm limit from the power switch is always in the open state.
DATE SET
Press MODE button four times to enter on set, then the month flashing, press MODE button
five times to enter the date set date at this time flashing, press the SET button to adjust the date
or month TIME SETTING Press MODE button 6 times, then the time display flashes, then press
SET button to set the hours (12/24 hours choice of two shows), according to MODE button
7 times, then show the minutes flashing, press SET button can be set to minutes, and then
press the MODE button to return, and then adjust the SET button to confirm the required time
after time.
RADIO
1) Open the battery cover, press the battery icon to the right into two 3A, and then cover
the battery cover.
2) The power switch to ON, adjust the volume to the appropriate.
3) In the FM band switch, the point is to listen to FM radio, while listening to the frequency
display is
4) - band switch in the AM, the point is to listen to AM radio in the AM band,
while the frequency display is listening
5) - band switches SW1-SW7 in any one of a band, the point is to listen to AM radio
in the short-wave band, also shows that the frequency of listening to VOLUME CONTROL:
In the case of income is the radio, adjust the sound volume.
POwER ON/OFF: Listening to the radio when ON, OFF the power to turn off radio.
1) FM/SW ANTENNA
2) MODE
3) FM/AM/SW1 - SW7 BAND SWITCH
4) SET
5) LCD DISPLAY
6) TUNING KNOB
7) VOLUME KNOB
8) POWER ON/OFF
9) SPEAKER
10) BATTERY BOX
(IN THE REAR PANEL)
ENG - 8

Advertisement

Table of Contents
loading

Table of Contents